Kia SELTOS - Setting Features

Driving your vehicle
1226
Blind-Spot Collision Warning (BCW)
Blind-Spot Collision Warning may
not detect every object alongside
the vehicle.
Setting features
Setting Blind-Spot Safety function
The driver can activate the function
by placing the ignition switch to the
ON position and by selecting 'User
settings → Driver assistance →
Blind-spot safety'.
䳜 Blind-Spot Collision Warning turns
on and gets ready to be operated
when 'Warning only' is selected.
Then, if a vehicle approaches the
driver's blind spot area a warning
sounds.
䳜 The function is deactivated when
'Off' is selected.
䳜 If the engine is turned off then on
again, the function maintains the
last setting.
Warning Timing
Selecting Warning Timing The driver
can select the initial warning activa
-
tion time in the User Settings in the
LCD display by selecting 'User set
-
tings → Driver assistance → Warn
-
ing timing'
The options for the initial Blind-Spot
Collision Warning includes the fol
-
lowing:
䳜 Normal: When this option is
selected, the initial Blind-Spot
Collision Warning is activated nor
-
mally.
If this setting feels sensitive,
change the option to 'Late'.
The warning activation time may
feel late if a vehicle at the side or
rear abruptly accelerates.
䳜 Late: Select this warning activa
-
tion time when the traffic is light
and you are driving in a low speed.
OSP2051282R
OSP2051284R