Kia SELTOS - Blind-Spot Collision-Avoidance Assist Settings

Driving your vehicle
1326
Blind-Spot Collision-Avoidance Assist (BCA)
changing lanes or backing up the
vehicle.
Blind-Spot Collision Warning and
Blind-Spot Collision-Avoidance
Assist may not detect every
object alongside the vehicle.
Blind-Spot Collision-Avoidance
Assist settings
Setting features
The driver can activate the function
by placing the ignition switch to the
ON position and by selecting 'User
settings → Driver assistance →
Blind-spot safety'
䳜 Blind-Spot Collision-Avoidance
Assist and Blind-Spot Collision
Warning turn on and get ready to
be activated when 'Active assist'
is selected. Then, if a vehicle
approaches the driver's blind spot
area a warning sounds or braking
power is applied.
䳜 Blind-Spot Collision Warning turns
on and gets ready to be activated
when 䳒Warning only䳓 is selected.
Then, if a vehicle approaches the
driver䳓s blind spot area a warning
sounds. Braking assist will not be
applied in this setting.
䳜 If you select "Off", Blind-Spot Col
-
lision Warning deactivates.
If the engine is turned off then on
again, the function maintains the
previous state.
Warning Timing
The driver can select the initial
warning activation time in the User
Settings in the LCD display or info
-
tainment function display by select
-
ing 'User settings → Driver
assistance → Warning timing'.
The options for the initial Blind-
Spot Collision Warning includes the
following:
䳜 Normal: When this condition is
selected, the initial Blind-Spot
Collision Warning is activated nor
-
mally. If this setting feels sensi
-
tive change the option to 'Late'.
OSP2051282R
OSP2051284R