Kia SELTOS - Page 139

133
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
The warning activation time may
feel late if a vehicle at the side or
rear abruptly accelerates.
䳜 Late: Select this warning activa
-
tion time when the traffic is light
and you are driving in a low speed.
NOTICE
If you change the warning timing,
the warning time of other functions
may change. Always be aware
before changing the warning timing.
Warning Volume
The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display or infotainment func
-
tion display by selecting 'User set
-
tings → Driver assistance →
Warning volume → High/Medium/
Low'
NOTICE
If you change the warning volume,
the warning volume of other func
-
tions may change. Always be aware
before changing the warning vol
-
ume.
Operating Conditions
The function enters the ready sta
-
tus, when 'Active assist' or 'Warning
only' is selected and the following
conditions are satisfied:
Active Assist
1. Blind-Spot Collision-Avoidance
Assist will activate when:
䳜 Vehicle speed is between 60
km/h and 180 km/h (40 mph ~
110 mph).
䳜 The function detects both of
the lane lines.
䳜 An approaching vehicle is
detected next to or behind your
vehicle.
2. Blind-Spot Collision Warning will
activate when:
The vehicle speed is above about
30 km/h (20 mph).
Warning Only
1. Blind-Spot Collision Warning will
activate when:
䳜 The vehicle speed is above 30
km/h (20 mph).
OSP2051285R