Kia SELTOS - Warning and Blind-Spot Collision Warning Control

123
6
6
Driving your vehicle Blind-Spot Collision Warning (BCW)
NOTICE
Information If you change the warn
-
ing timing, the warning time of
other functions may change. Always
be aware before changing the warn
-
ing timing.
Warning Volume
The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display by selecting 'User set
-
tings → Driver assistance → Warn
-
ing volume → High/Medium/Low'.
NOTICE
Information If you change the warn
-
ing volume, the warning volume of
other functions may change. Always
be aware before changing the warn
-
ing volume.
NOTICE
䳜 If the vehicle is turned off then on
again, Blind-Spot Collision
Warning returns to the previous
state.
䳜 When the function is turned on,
the warning light will illuminate
for 3 seconds on the outside rear
view mirror.
The function will activate when: 1.
1. The function is on.
2. The vehicle speed is above
approximately 30 km/h (20 mph).
3. An oncoming vehicle is detected in
the blind spot area.
Warning and Blind-Spot Collision
Warning control
Blind-Spot Collision Warning
1st stage
If a vehicle is detected within the
boundary of the function, a warning
light will illuminate on the outside
rear view mirror.
OSP2051285R
ODEEV078091NR