Kia SELTOS - Limitations of Rear Cross-Traffic Collision Warning

185
6
6
Driving your vehicle Rear Cross-Traffic Collision Warning (RCCW)
Check Blind-Spot Collision Warning
(BCW) system
If there is a problem with Blind-Spot
Collision Warning function, a warning
message will appear. The function
will turn off automatically. Rear
Cross-Traffic Collision Warning will
not operate also if Blind-Spot Colli
-
sion Warning turns off due to mal
-
function. We recommend that you
have your vehicle inspected by an
authorised Kia dealer/service part
-
ner.
Limitations of Rear Cross-Traffic
Collision Warning
The driver must be cautious in the
below situations, because the func
-
tion may not detect other vehicles
or objects in certain circumstances.
䳜 When a trailer or carrier is
installed.
䳜 The vehicle drives in inclement
weather such as heavy rain or
snow.
䳜 The sensor is polluted with rain,
snow, mud, etc.
䳜 The rear bumper where the sen
-
sor is located is covered with a
foreign object such as a bumper
sticker, a bumper guard, a bike
rack, etc.
䳜 The rear bumper is damaged, or
the sensor is out of the original
default position.
䳜 The vehicle height gets lower or
higher due to heavy loading in a
luggage compartment, abnormal
tyre pressure, etc.
䳜 When the temperature of the
rear bumper is high.
䳜 When the sensors are blocked by
other vehicles, walls or parking-
lot pillars.
䳜 The vehicle drives on a curved
road.
䳜 The road pavement (or the
peripheral ground) abnormally
contains metallic components (i.e.
possibly due to subway construc
-
tion).
䳜 There is a fixed object near the
vehicle, such as a guardrail.
䳜 whilst going down or up a steep
road where the height of the lane
is different.
䳜 Driving on a narrow road where
trees or grass or overgrown.
䳜 Driving in rural areas where the
sensor does not detect another
vehicle for an extended period of
time.
䳜 Driving on a wet road.
OSP2059175E