87
8
8
Maintenance Light bulbs
Replacing license plate lamp bulb
1. Using a screwdriver, gently pry
the lamp assembly from interior.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to inte
-
rior.
Replacing map lamp (bulb type)
bulb
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb (1) by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Prior to working on the Interior
lamps, ensure that the 䳖OFF䳗 button
is depressed to avoid burning your
fingers or receiving an electric
shock.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Replacing map lamp (LED type)
bulb
If the map lamp LED (1) does not
operate, we recommend that the
system be checked by a profes
-
sional workshop. Kia recommends to
visit an authorised Kia dealer/ser
-
vice partner.
To Next Page
Loading...
