Kia SELTOS - Junction Turning Function

93
6
6
Driving your vehicle Forward Collision-Avoidance Assist (FCA)
(Sensor fusion)
Junction Turning function (if
equipped)
Junction Turning function will help
avoid a collision with an oncoming
vehicle in an adjacent lane when
turning left at a crossroad with the
turn signal on by applying emer
-
gency braking.
NOTICE
Forward Collision-Avoidance Assist
stands for Forward Collision-Avoid
-
ance Assist.
CAUTION
Take the following precautions to
maintain optimal performance of
the detecting sensor:
䳜 Never disassemble the detecting
sensor or sensor assembly, or
apply any impact on it.
䳜 If the detecting sensors have
been replaced or repaired, we rec
-
ommend that you have your vehi
-
cle inspected by an authorized
Kiadealer/service partner.
䳜 Never install any accessories or
stickers on the front windshield,
or tint the front windshield.
䳜 Pay extreme caution to keep the
front view camera dry.
䳜 Never place any reflective objects
(i.e. white paper, mirror) over the
dashboard. Any light reflection
may prevent the function from
functioning properly.
䳜 Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard,
near the front radar cover.
䳜 Always keep the front radar and
cover clean and free of dirt and
debris. Use only a soft cloth to
wash the vehicle. Do not spray
pressurized water directly on the
sensor or sensor cover.
䳜 If unnecessary force has been
applied to the radar or around the
radar, Forward Collision-Avoid
-
ance Assist may not properly
operate even though a warning
message does not appear on the
cluster. In this case, we recom
-
mend that you have the vehicle
inspected by an authorized
Kiadealer/service partner.
䳜 Use only genuine parts to repair
or replace a damaged front radar
cover. Do not apply paint to the
front radar cover.
OCK050301N