Kia SELTOS - Driving Assist Button; Setting Cruise Control Speed

Driving your vehicle
1546
Cruise Control (CC)
Driving Assist button
䳜 CANCEL: Cancels Cruise Control
operation.
䳜 CRUISE: Turns Cruise Control on or
off.
䳜 RES+: Resumes or increases
cruise control speed.
䳜 SET-: Sets or decreases Cruise
Control speed.
Setting Cruise Control speed
1. Press the Driving Assist button on
the steering wheel, to turn the
function on. The cruise status on
the LCD screen will appear.
2. Accelerate to the desired speed,
which must be more than 30 km/
h.
NOTICE
Manual transmission
For manual transmission vehicles,
you should depress the brake pedal
at least once to set Cruise Control
after starting the engine.
3. Move down the SET- switch, and
release it at the desired speed.
The cruise status on the LCD
screen will appear. Release the
accelerator pedal at the same
time. The desired speed will auto
-
matically be maintained.
On a steep grade, the vehicle may
slow down or speed up slightly
whilst going downhill.
OSP2051187L
OSP2051259L
OSP2051260L