Maintenance
908
Light bulbs
Replacing luggage room lamp (bulb
type) bulb
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Headlamp and front fog lamp aim
-
ing (for Europe)
Headlamp aiming
Headlamp - Type A
Headlamp - Type B
1. Inflate the tyres to the specified
pressure and remove any loads
from the vehicle except the driver,
spare tyre, and tools.
2. The vehicle should be placed on a
flat floor.
3. Draw vertical lines (Vertical lines
passing through respective head
lamp centres) and a horizontal
line (Horizontal line passing
To Next Page
Loading...
