Driving your vehicle
1346
Blind-Spot Collision-Avoidance Assist (BCA)
* Blind-Spot Collision-Avoidance
Assist is not activated.
Warning and Blind-Spot Collision-
Avoidance Assist control
Blind-Spot Collision Warning
1st stage
If a vehicle is detected within the
boundary of the function, a warning
light will illuminate on the outside
rear view mirror.
Once the detected vehicle is no lon
-
ger within the blind spot area, the
warning will turn off according to
the driving conditions of the vehicle.
2nd stage
[A]: Warning sound
A warning chime to warn the driver
will activate when:
1. A vehicle has been detected in the
blind spot area by the radar func
-
tion AND.
2. The turn signal is applied (same
side as where the vehicle is being
detected).
When this warn is activated, the
warning light on the outside rear
view mirror will blink. And a warning
chime will sound.
To Next Page
Loading...
