Driving your vehicle
806
Forward Collision-Avoidance Assist (FCA) (Front
view camera only)
Prerequisite for activation
Forward Collision-Avoidance Assist
gets ready to be activated, when
'Active assist' or 'Warning only'
under Forward Safety is selected in
on the LCD display, and when the
following prerequisites are satisfied.
䳜 The ESC (Electronic Stability Con
-
trol) is on.
䳜 Vehicle speed is over 10 km/h (6
mph). (Forward Collision-
Avoidance Assist is only activated
within a certain speed range.)
䳜 The function detects a vehicle in
front, which may collide with your
vehicle. (Forward Collision-
Avoidance Assist may not be acti
-
vated or may sound a warning
alarm in accordance with the driv
-
ing situation or vehicle condition.)
䳜 Forward Collision-Avoidance
Assist automatically activates
upon placing the ignition switch to
the ON position. The driver can
deactivate Forward Collision-
Avoidance Assist by canceling the
function setting in the cluster LCD
display. To avoid driver distrac
-
tions, do not attempt to set or
cancel Forward Collision-
Avoidance Assist whilst driving
the vehicle.
䳜 Forward Collision-Avoidance
Assist automatically deactivates
upon canceling ESC. When ESC is
cancelled, Forward Collision-
Avoidance Assist cannot be acti
-
vated in the cluster LCD display.
Forward Safety warning light will
illuminate which is normal. At this
time, Forward Collision-Avoidance
Assist cannot be set even in
instrument cluster or infotain
-
ment function user setting mode.
䳜 At this time, Forward Collision-
Avoidance Assist cannot be set
even in instrument cluster or
infotainment function user set
-
ting mode.
Forward Collision-Avoidance Assist
warning message and brake control
Forward Collision-Avoidance Assist
produces warning messages, and
warning alarms in accordance with
the collision risk levels, such as
abrupt stopping of the vehicle in
front, insufficient braking distance,
pedestrian detection. Also, it con
-
trols the brakes in accordance with
the collision risk levels.
To Next Page
Loading...
