Driving your vehicle
1906
Rear Cross-Traffic Collision-Avoidance Assist
(RCCA)
Rear Cross-Traffic Collision Avoid
-
ance Assist setting and activation
Rear Cross-Traffic Collision Avoid
-
ance Assist setting
䳜 The driver can activate the func
-
tions by placing the ignition
switch to the ON position and by
selecting ''User settings → Driver
assistance → Parking safety →
Rear cross-traffic safety''. Rear
Cross-Traffic Collision-Avoidance
Assist turns on and get ready to
be activated when 'Rear cross-
traffic safety' is selected.
䳜 When the engine is turned off
then on again, the functions are
always ready to be activated.
䳜 When the function is initially
turned on and when the engine is
turned off then on again, the
warning light will illuminate for 3
seconds on the outside rear view
mirror.
Warning Timing
The driver can select the initial
warning activation time in the User
Settings in the LCD display or info
-
tainment function display by select
-
ing 'User settings → Driver
assistance → Warning timing'.
The options for the initial Rear
Cross-Traffic Collision Warning
includes the following:
䳜 Normal: When this condition is
selected, the initial Rear Cross-
Traffic Collision Warning is acti
-
vated normally. If this setting
feels sensitive, change the option
to 'Late'.
䳜 The warning activation time may
feel late if the a vehicle at the side
or rear abruptly accelerates.
䳜 Late: Select this warning activa
-
tion time when the traffic is light
and you are driving in a low speed.
To Next Page
Loading...
