179
6
6
Driving your vehicle Rear Cross-Traffic Collision Warning (RCCW)
Rear Cross-Traffic Collision
Warning (RCCW) (if equipped)
Rear Cross-Traffic Collision Warning
uses radar sensors to monitor the
approaching cross traffic from the
left and right side of the vehicle
when your vehicle is in reverse.
The blind spot detection range var
-
ies relative to the approaching vehi
-
cle speed.
Always be aware of road conditions
whilst driving and be warn for unex
-
pected situations even though Rear
Cross-Traffic Collision Warning is
operating.
Rear Cross-Traffic Collision Warning
is supplemental function to assist
you. Do not entirely rely on the
functions. Always pay attention,
whilst driving, for your safety.
Rear Cross-Traffic Collision Warning
is not substitutes for proper and
safe driving. Always drive safely and
use caution when backing up the
vehicle.
Rear Cross-Traffic Collision Warn
-
ing setting
䳜 The driver can activate the func
-
tions by placing the ignition
switch to the ON position and by
selecting ''User settings → Driver
assistance → Parking safety →
Rear cross-traffic safety''. Rear
Cross-Traffic Collision Warning
turn on and get ready to be acti
-
vated when 'Rear cross-traffic
safety' is selected.
䳜 When the engine is turned off
then on again, the functions are
always ready to be activated.
䳜 When the function is initially
turned on and when the engine is
turned off then on again, the
warning light will illuminate for 3
seconds on the outside rear view
mirror.