25
7
7
What to do in an emergency Towing
vehicle connecting it with other
vehicles including camper vans.
When towing your vehicle in an
emergency without wheel dollies:
1. Set the ignition switch in the ACC
position.
2. Place the transmission shift lever
in N (Neutral).
3. Release the parking brake.
Failure to place the transmission
shift lever in N (Neutral) may cause
internal damage to the transmis
-
sion.
Removable towing hook (if
equipped)
1. Open the tailgate, and remove the
towing hook from the tool case.
2. Remove the hole cover pressing
the lower part of the cover on the
bumper.
3. Install the towing hook by turning
it clockwise into the hole until it is
fully secured.
4. Remove the towing hook and
install the cover after use.
To Next Page
Loading...
