Kia SELTOS - Page 46

Driving your vehicle
406
Dual clutch transmission (DCT)
The shift lever must be in P (Park)
before turning the engine off.
WARNING
䳜 Shifting into P (Park) whilst the
vehicle is in motion may cause
you to lose control of the vehicle.
䳜 After the vehicle has stopped,
always make sure the shift lever
is in P (Park), apply the parking
brake, and turn the engine off.
䳜 Do not use the P (Park) position in
place of the parking brake.
R (Reverse)
Use this position to drive the vehicle
backward.
CAUTION
Always come to a complete stop
before shifting into or out of R
(Reverse); you may damage the
transmission if you shift into R
(Reverse) whilst the vehicle is in
motion.
N (Neutral)
The wheels and transmission are
not engaged.
WARNING
Do not shift into gear unless your
foot is firmly on the brake pedal.
Shifting into gear when the engine is
running at high speed can cause the
vehicle to move very rapidly. You
could lose control of the vehicle and
hit people or objects.
WARNING
Do not drive with the shift lever in N
(Neutral).
The engine brake will not work and
lead to an accident.
Parking in N (Neutral) gear
Follow below steps when parking
and you want the vehicle to move
when pushed.
1. After parking your vehicle, step on
the brake pedal and move the
shift lever to "P" with the ignition
button in "ON" or whilst the
engine is running.
2. If the parking brake is applied
unlock the parking brake.
䳜 For EPB (Electronic Parking
Brake) equipped vehicles, push
the brake pedal with the igni
-
tion button in "ON" or whilst the
engine is running to disengage
the parking brake. If AUTO
HOLD function is used whilst
driving (If "AUTO HOLD" indica
-
tor is on in the cluster), press
"AUTO HOLD" switch and "AUTO
HOLD" function should be turn
off.