Driving your vehicle
686
Brake system
(ESC OFF indicator will illuminate).
To turn the ESC on, press the ESC
OFF button (ESC OFF indicator
light will go off).
䳜 When starting the vehicle, you
may hear a slight ticking sound.
This is the ESC performing an
automatic system self-check and
does not indicate a problem.
When operating
When the ESC is in operation,
the ESC indicator light blinks.
When the Electronic Stability
Control is operating properly, you
can feel a slight pulsation in the
vehicle. This is only the effect of
brake control and indicates nothing
unusual.
When moving out of the mud or
driving on a slippery road, pressing
the accelerator pedal may not cause
the vehicle rpm (revolutions per
minute) to increase.
ESC operation off
This car has 2 kinds of ESC off
states.
If the vehicle stops when ESC
is off, ESC remains off. Upon
restarting the vehicle, the ESC will
automatically turn on again.
ESC off state 1
To turn off the traction control
function and only operate the brake
control function of the ESC, press
the ESC OFF button (ESC OFF )
for less than 3 seconds and the ESC
OFF indicator light (ESC OFF ) will
illuminate.
ESC off state 2
To turn off the traction control
function and the brake control func
-
tion of the ESC, press the ESC OFF
button (ESC OFF ) for more than
3 seconds. ESC OFF indicator light
To Next Page
Loading...
