EPISENSOR USER GUIDE SAFETY 1
Safety
Symbols & Terms
The following symbols may appear on Kinemetrics equipment or in this
manual.
When you see this symbol, pay careful attention. Refer to the similarly
marked, relevant part of this manual before servicing the instrument.
This symbol means a low-noise earth ground. The noted item should be
grounded to ensure low-noise operation, and also to serve as a ground return
for EMI/RFI and transients. Such a ground does not work as a safety
ground for protection against electrical shock!
~ This symbol means an alternating current (AC) power line.
This symbol means a direct current (DC) power line derived from an AC
power line.
This symbol indicates an electrostatic sensitive device (ESD), meaning that
when handling the marked equipment you should observe all standard
precautions for handling such devices.
These safety-related terms appear in this manual:
Note: statements identify information that you should consider before
moving to the next instruction or choice.
Caution statements identify conditions or practices that could result in
damage to the equipment, the software, or other property.
WARNING! statements identify conditions or practices that could result in
personal injury or loss of life.
!
To Next Page
Loading...
Need help?
General