M0290-01Model 4900
2-20 Rev. 8/19
TM
Machine Operation
FUNCTION
FOLDPLANT
OFF
HITCH
FOLD
OFF
AXLE
WING
WHEELS
DP INCR L INCR
VACUUM
R INCR
DP DECR L DECR
R DECR
WORK
LIGHTS
BF
ONLY
OFF
MARKERS
OFF
RIGHTLEFT
OFF
RIGHT
LEFT
POINT ROW
TM
6. Operate the proper hydraulic tractor control and
press the FOLD switch up to move wings out, away
from tractor. Planter is completely unfolded when
stub wings are latched into the H-frame as shown in
bottom photos.
Planter Unfolding
Control Box
Stub Wing Latched into Frame
7. Lower drawbar or 2-point hitch to level machine during planting.
8. Lower planter and hold hydraulic lever for an additional 10-15 seconds to rephase cylinders.
Unfolding planter without using tractor
to assist may cause equipment damage
especially in soft conditions or when
loaded with seed or fertilizer. Use tractor
to reduce stress on frame, drive, and
transport components.
NOTICE
To Next Page
Loading...
