Kioti DS3510 - Installing Pto Shaft

DS3510
6
-
8
T66O122A
INSTALLING PTO SHAFT
1. Consult your local KIOTI Dealer
for selection of the universal joint.
2. When selecting a universal joint,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and male
shafts at the lowest position.
3. Move the joint back and forth to
check that its lock pin is properly
seated to the groove of the PTO
shaft.
(1) Universal Joint
H11O682A
11
C56O140A
(1) Lock Pin

Make sure that the PTO safety
cover is in its position before
driving the PTO shaft.

The PTO shaft and universal
joint shaft should not in con-
tact with by any surrounding
parts.

Stay away from the rotating
PTO shaft or universal joint
shaft. A severe accident could
occur.
WARNING
DS3510(UM26)-AU-06.indd 8 2010-12-31 오후 3:41:47