T46w031A
Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
Check tires for ination pres-
sure, damage, deformation,
and extended wear on lug and
damage of rim and disc. Also
check if wheel bolts, rim bolts,
and nuts are loose.
WARNING
TREAD
(1) Bolt (2) Rim Bolt (3) Disc
U26O401A
When working on a eld where crops are linearly aligned, the tread should be
adjusted so that the tires do not cross over the crops.
It is also necessary to widen wheel tread to decrease danger when working on
slopes or hills, or when doing trailer work, etc.
Never operate tractor with a loose rim, wheel, or axle.
Always tighten nuts or bolts to the specied torque.
Make sure to frequently check that all these parts are rmly tight-
ened.
Make sure to perform inspection daily.
WARNING
To Next Page
Loading...
