Kioti DS3510 - Page 67

4
-
23
DESCRIPTION OF OPERATING SYSTEM
4
T46w030A

The tire rims can fall out of
the tires. Therefore, stay out
of their way when checking or
inating tires.
WARNING
Always maintain the proper tire ination pressure. Make sure the tire pressure
does not exceed the pressure recommended in the manual.
INFLATION PRESSURE
* IND : for Industrial.
DS3510
Tire sizes Ination pressure
Rear
AG 11.2-24,6PR 179 kPa (1.8 kgf/cm
2
, 26psi)
Turf 41X14.0-20,4PR 172 kPa (1.8 kgf/cm
2
, 25 psi)
Industrial 15-19.5,6PR 248 kPa (2.5 kgf/cm
2
, 36psi)
Front
AG 7-14,4PR 196 kPa (2.0 kgf/cm
2
, 28psi)
Turf 27X8.50-15,4PR 207 kPa (2.1 kgf/cm
2
, 30 psi)
Industrial 25X8.50-14,6PR 345 kPa (3.5 kgf/cm
2
, 50psi)

Keep the front tire pressure to maximum if maximum load is applied to the
loader or front weight.

If tires with a different size from the ones already in use are installed, con-
tact the KIOTI dealer for the front/rear wheel speed ratio. Improper front/
rear wheel speed ratio can result in excessive wear of the tires.
NOTE
DS3510(UM26)-AU-04.indd 23 2010-12-31 오후 3:40:20