U26O418A U26O419A
Four speeds can be selected by
moving this main shift lever in “H”
shaped path. You can shift into this
lever from the 1st to 4th gears even
when the tractor body is moving by
disengaging the clutch during driving
as these gears are constanted.
In total, 8 forward driving speeds and
8 reverse driving speeds are provid-
ed by combination of the main shift
lever (4 speeds), range shift lever (2
speeds), shuttle shift lever.
(1) Main Shift Lever (1) Range Gear Shift Lever
( ) High Speed ( ) Low Speed
High and low speeds can be se-
lected by the range shift lever. Make
sure to shift the range shift lever after
the tractor is completely stopped by
depressing the clutch pedal.
If the lever is not moved freely or
makes abnormal noise, put the lever
into the neutral position, engage and
disengage the clutch, and then try to
shift the lever.
MAIN SHIFT LEVER RANGE GEAR SHIFT LEVER
Make sure to shift the range
gear shift lever with the clutch
pedal depressed and the trac-
tor stationary.
Never put the range shift lever
into the high speed position
during driving backward as it
is dangerous to drive at a high
speed.
The tractor is not braked by
depressing the brake pedal
without depressing the clutch
pedal at a low speed as rota-
tional force of the axle has a
major effect at a low speed.
Th e r e f o re , d i s e ng a g e t h e
clutch before depressing the
brake pedal to stop the tractor.
CAUTION
To Next Page
Loading...
