The differential lock is to secure the
differential system and keep the
wheel rotation on both sides the
same in order to enhance the trac-
tion of the rear axle.
Depressing the pedal engages the
differential lock while releasing the
pedal disengages the differential
lock.
Use this system under the following
conditions:
DIFFERENTIAL LOCK PEDAL
(1) Lock Pedal
(A) Release to “Disengage”
(B) Depress to “Engage”
(1) Seat Adjustment Lever
To adjust the seat position, pull the
lever (1) to left under the front of the
seat, slide the seat to the desired po-
sition, and then release the lever.
Make sure that the seat is rmly xed
by moving it gently after adjustment.
U26O428A
SEAT ADJUSTMENT
SEAT SLIDING
U26O427A
1. When any wheel slips and the
tractor does not move in the eld.
2. When it is hard to escape a paddy
eld.
The differential lock should be
engaged only while the driv-
ing clutch is engaged. If the
differential lock pedal does
not move when depressing it,
try to depress it again after re-
leasing it.
When engaging the differential
lock, reduce the engine speed.
After engaging it, accelerate
the tractor.
Make sure to set the steering
wheel in the straight ahead
position while the differential
lock is in use. Otherwise, the
differential syst em can be
damaged.
CAUTION
Do not put a hand between the
seat and the slides when ad-
justing the seat position. You
can get injured unexpectedly.
CAUTION
To Next Page
Loading...
