DRIVING ON SLOPE
1. Please drive according to the con-
ditions of the slope at safe speed
so that the engine is not under
heavy load if possible.
2. Make sure to shift to the lower
gear in order to prevent the engine
from stalling on an uphill.
3. On the downhill slope, drive at the
low speed.
For heavy load job, such as
front end loader operation,
use low or medium speed of
the range shift lever.
IMPORTANT
Make sure that the coupling
device of brake pedal and dif-
ferential lock pedal are surely
released.
Do not disengage the clutch or
put the shift lever in the neu-
tral position on a slope. Other-
wise, the tractor may become
inoperable. Before entering
a steep slope, move the shift
lever down to a proper gear
and never try to move the shift
lever on a slope. A serious ac-
cident can occur.
WARNING
PRECAUTIONS WHEN COMING
IN AND OUT OF PAVED ROAD
1. Make sure that the left and right
pedal are interlocked.
2.Enter and exit the eld by driving
the tractor at a right angle to the
bank.
3. It is recommended to use the 4WD
and drive backward when moving
onto a bank.
C56o502a
To Next Page
Loading...
