U26O716A
(1) Oil Filler Plug (2) Drain Plug
1. To drain the used oil, remove the
right and left drain plugs and fill-
ing plug at the front axle case and
drain the oil completely into the oil
pan.
2. After draining reinstall the drain
plugs.
3. Remove the oil level check plug on
the left of the front axle.
4. Add new oil to the specied level
of the check plug through the oil
ller. (Refer to “Lubrication” in the
chapter “Service”)
5. Tighten the oil filler plug after re-
plenishment.
6. Check the oil level in 15 minutes
and add oil as necessary.
(1) Oil Check Plug
U26O717A
O aat 1.19 U.S.gal. (4.5 L)
To Next Page
Loading...
