U26O705A
U26O706A
(1) Oil Gauge
(A) Oil Level Is Acceptable Within Range
1. Park the machine on a at surface,
lower the implement and shut
“OFF” engine.
2. Depress the brake pedals and ap-
ply the parking brake.
3. Set all shift levers into the neutral
position.
4. Stop the engine.
(1) Oil Filler Plug
5. Check if the oil level is between
the red lines.
6. If the oil level is too low, add some
new oil so that the level is within
the allowable range. (Refer to
“Lubricant” in this chapter for uid
specs.
-
To Next Page
Loading...
