3. Align pin holes, insert set pin, and
secure them with the clip pin.
(1) Grip Bolt (2) Set Pin
(3) Clip Pin
U26o513a
To avoid accidents:
Make sure the pins are prop-
erly installed and secured.
CAUTION
HOW TO RAISE THE ROPS TO
UPRIGHT POSITION
1. Remove both the grip bolt, clip pin
and set pin.
2. Raise ROPS to the upright position.
3. Align pin holes, insert set pin and
secure them with the clip pin.
4. Fix the ROPS with the grip bolt.
(1) ROPS
U26o512a
2. Loosen the grip bolt and fold the
ROPS.
To avoid personal injury:
Hold the ROPS tightly with
both hands and fold the ROPS
slowly and carefully.
CAUTION
(1) Grip Bolt (2) Set Pin
(3) Clip Pin
U26o511a
To Next Page
Loading...
