WHEN USING THE 3-POINT HITCH
1. Use the 3-point hitch only with
equipment designed for 3-point
hitch usage.
2. When using a 3-point hitch mount-
ed implement, be sure to install the
proper counterbalance weight on
the front of the tractor.
3. When transporting on the road,
set the implement lowering control
in the "LOCK" position to hold the
implement in the raised position.
T66O122a
4. When operating stationary P.T.O
driven equipment, always apply
the tractor parking brake and place
chocks behind and in front of the
rear wheels. Stay clear of all rotat-
ing parts.
5. Do not attach a P.T.O driven imple-
ment if the implements safety
shields are damaged or not in
place. Rotating shafts are an en-
tanglement hazard.
(1) 3-point hitch lowering speed knob
(A) “FAST” (B) “SLOW”
(C) ”LOCK”
S41O122a
3. Before installing or using P.T.O
driven equipment, read the man-
ufacturer's manual and review the
safety labels attached to the equip-
ment.
To Next Page
Loading...
