Kioti DS3510 - Checking Gauges, Meter and Indicator Lights (I); Checking Head Light, Hazard Light ETC. (J); Checking Seat Belt and Rops (K); Changing Engine Oil and Replacing Filter (L)

7
-
13
MAINTENANCE
7


1. Inspect the instrument panel for
broken gauge(s), meter(s) and in-
dicator lights.
2. Replace if broken.
-

1. Inspect the lights for broken bulbs
and lenses.
2. Replace if broken.
CHECKING SEAT BELT AND

1. Always check condition of seat
belt and  attaching hardware
before operating tractor.
2. Replace if damaged.

U26O710A
1. Park the tractor on a level ground
and start the engine to warm it up.
2. Stop the engine, apply the parking
brake, and remove the drain plug.
3. To drain the used oil, remove the
drain plug at the bottom of the en-
gine and drain the oil completely
into the oil pan.
All the used oil can be drained
out easily when the engine is still
warm.
(1) Drain Plug
U26O707A
(1) Oil Inlet Plug (2) Gauge
(A) Oil Level is Acceptable Within This Range
DS3510(UM26)-AU-07.indd 13 2010-12-31 오후 3:42:30