Kioti DS3510 - Slow Blow Fuse (Ai)

7
-
35
MAINTENANCE
7
H11O655A
3. If fuse is blow be sure to replace
with a new correct capacity fuse
insure that it is rmly installed.
4. Install the fuse box cover.
(1) Slow Blow Fuse
U26O738A

The slow-blow fuse is to protect the
electric wiring. If it is blown, nd and
repair the cause and replace it with a
new genuine part.
So bo fuse 60 A

      -
   


     
     -
     

WARNING

If the replaced fuse is blown
quickly, it is probable that the
wiring system is faulty. In this
case, contact your local KIOTI
Dealer.

If the fusible link, relay or other
electrical component is faulty,
contact your local KIOTI Dealer.
NOTE

   
    -
    


DS3510(UM26)-AU-07.indd 35 2010-12-31 오후 3:43:00