(1) Adjusting Bolt (2) Lock Nut
U26O734A
If the front axle pivot pin adjustment
is not correct, front wheel vibration
can occur causing vibration in the
steering wheel.
Loosen the lock nut, tighten the ad-
justing screw all the way, and then
loosen the screw by 1/6 turn. Re-
tighten the lock nut.
This service can be affected by the
engine sensitively. Therefore, contact
your local KIOTI Dealer for this ser-
vice.
(1) Power Steering Oil Line
U26O733A
1. Check to see that all hydraulic
lines and hose ttings are tight and
undamaged.
2. If damage is found you should re-
place the hose at once.
To Next Page
Loading...
