If the air cleaner is not in a good con-
dition, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the lter
should be inspected frequently. Its
replacement interval can be changed
according to driving conditions. Re-
place the filter according to the fol-
lowing proce-dure:
1. Open the hood and check the suc-
tion hose and air cleaner housing
for damage.
2. Unscrew the air cleaner clip and
remove the cover.
3. Clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. Replace the filter and check the
housing for damage.
5. Install the cover and x it with the
clip.
FLUSH COOLING SYSTEM AND
U26O735A
(1) Drain Cock
1. Stop the engine and let it cool.
2. To drain the coolant, open the radi-
ator drain cock and remove radia-
tor cap. The radiator cap must be
removed to completely drain the
coolant.
3. After all coolant is drained, close
the drain cock.
4. Fill with clean water and cooling
system cleaner.
5. Follow the cleaner manufacture’s
instruction.
-
-
-
CAUTION
When installing the cover, make
sure that the dust collection
valve is heading down.
NOTE
U26O727A
(1) Element (2) Cap
(3) Evacuator Valve
To Next Page
Loading...
Need help?
General
