Driving with high beam head
light disturbs the approach-
ing vehicle’s visibility for safe
driving. Use the high beam
head lights only if necessary.
WARNING
The turn signal light lever is not
the self-return type. Therefore,
make sure to return the lever
manually after turning the vehicle.
The turn signal lamps can be op-
erated without the key inserted.
NOTE
(1) Horn Switch
The horn switch can be operated
without the key inserted. Pressing
this switch sounds the horn.
HORN SWITCH
U26O408A
TURN SIGNAL LIGHT SWITCH
U26O407A
(1) Turn Signal Light Switch
(A) Right Turn (B) Left Turn
The turn signal lights are used when
turning the vehicle left or right. Pull-
ing the lever up blinks the right turn
signal light while pushing the lever
down blinks the left turn signal light.
To Next Page
Loading...
