EasyManua.ls Logo

Kioti DS3510 - Page 74

Kioti DS3510
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
-
30
DS3510
ADDITIONAL LIQUID TYPE WEIGHT
It is possible to inject water and cal-
cium solution into the tire to use it as
a ballast.
If one liter of water is mixed with 0.4
kg of calcium, this liquid does not
freeze down at -49
(-45
).
For a tire without a tube, fill it with
water and calcium solution at least to
the valve stem level (75 %) with the
valve stem.
If the tire without a tube is not lled
with water and calcium solution suf-
ciently, a part of the ream is exposed,
resulting in corrosion.
For a tire with a tube, ll it up to 90%
of its level.
The liquid injection should be
performed only by a qualified
service personnel.
For detailed information, contact
your local KIOTI Dealer.
NOTE
If the liquid ballast is used, inate
the tire 0.14 bar (2 psi) more
than the specied pressure.
This
is to compensate for the ventila-
tion symptom which occurs while
the tire is moving.
NOTE
DS3510(UM26)-AU-04.indd 30 2010-12-31 오후 3:40:26

Table of Contents

Related product manuals