(1) Position Control Lever
(A) “DOWN”
6. Lower the attachment by pushing
the position control lever toward.
Make sure that no one is around
the implement or behind the
tractor.
IMPORTANT
U26o503a
(1) Hand Throttle Lever
“Increase” “Decrease”
U26o504a
7. Set the hand throttle lever into the
neutral position.
8.
Depress the clutch pedal.
9. Insert the key into the key switch
and turn it “ON”. Maintain it until
the preheat lamp is turned “OFF”.
(approx. 8 sec)
(1) Key switch (A) Start
(B) Heat (C) "ON"
(D) “ACC” (E) “OFF”
U26o404a