To prevent injuries:
When connect ing, discon
-
necting or cleaning any PTO
driven equipment, stop all
rotating parts, stop the engine
and disengage the PTO.
•
CAUTION
U
WARNING
Ensure that implements and
attachments are properly in-
stalled and that the tractor and
implement PTO RPM ratings
match.
•
WARNING
Also, for light load work, select the
2nd gear (540E) position and set the
engine speed to 1800 RPM to obtain
540 RPM of the PTO speed.
(1) Clutch Pedal
Tf1O436A
CLUTCH PEDAL
Make sure to depress the clutch ped-
al to its end. To start off smoothly, put
the main and range shift levers into
the proper positions and release the
clutch pedal slowly.
It is possible to shift the shuttle shift
lever without depressing the clutch
pedal. However, the clutch pedal
should be depressed in advance
to cut the power before shifting the
main or range shift lever into the de-
sired position. (Power shuttle only)
When releasing the pedal, re-
move your foot from the pedal
slowly to avoid abruptly driv-
ing off.
•
CAUTION
Never put your foot onto the
clutch pedal during driving.
The clutch disc can be worn
prematurely.
Be sure to depress the clutch
pedal fully when shifting. Oth-
erwise, the shift gear can be
broken.
IMPORTANT
To Next Page
Loading...
