1. Inspect the instrument panel for
broken gauge(s), meter(s) and
Easy Checker lamps.
2. Replace if broken.
CHECKING HEAD LIGHT, HAZ-
ARD LIGHT ETC. (I)
1. Inspect the lights for broken bulbs
and lenses.
2. Replace if broken.
CHECKING SEAT BELT AND
CABIN (J)
1. Always check condition of seat
belt and cabin attaching hardware
before operating tractor.
2. Replace if damaged.
CHECKING GAUGES, METER
AND EASY CHECKER (H)
1. Park the tractor on level ground
and start the engine to warm it up.
(1) Oil Dipstick (2) Engine Oil Filler Cap
(A) Oil level is acceptable within this range
(1) Drain Plug
M55O761A
2. Stop the engine, apply the parking
brake and place the container un-
der the tractor.
3. Wait until the oil is cooled down.
4. Take off engine oil ller cap to al-
low easy draining for engine oil.
5. Remove the drain plugs at the bot-
tom of the engine and drain the oil
completely. All the used oil can be
drained out easily when the engine
is still warm. Be sure to install the
drain plugs(X2) to the oil pan se-
curely.
Allowable torque: 4~4.5kgf.m
TF1O707A
To Next Page
Loading...
