There are marks for the fuse capac-
ity and location on the cover of the
fuse panel. Replace the fuse accord-
ing to the following procedure:
1. Turn the key switch to the "OFF"
position and turn off all the electri-
cal devices.
2. Op en the fu se bo x cover a nd
check the fuse in question using
fuse tongs.
H11O655A
3. If the fuse is blown, replace it with
a new fuse with the same capacity.
Make sure it is rmly installed.
4. Install the fuse box cover.
MAIN FUSE (AM)
(1) Ignition Power Fuse
(2) Preheat Power Fuse
(3) Main Power Fuse
(4) Charge Power Fuse
TF1O716A
TF1O717A