HOW TO WARM UP ENGINE
1. After starting the engine with the
clutch depressed, make sure that
the shuttle lever is in its neutral po-
sition and release the clutch pedal
slowly for warm-up.
2.
Run the engine around 1,500 rpm’s
for the period of time indicated in the
table below in accordance with each
ambient temperature.
Ambient
temperature
Warm-up period
0
℃
or warmer 5~10 minuites
0
℃
~ -10
℃
10~20 minutes
-10
℃
~ -20
℃
20~30 minutes
-20
℃
or colder
30 minutes or more
Warming up the engine exces-
sively increases fuel consump-
tion and affects the durability
of the tractor negatively.
Never leave the tractor unat-
tended while warming up. It
can cause re and an accident.
WARNING
Be sure to apply parking brake
while warming up the engine.
If the warm-up is skipped or
missed, the tractor can take off
abruptly to cause a fatal accident.
WARNING
(1) Dead Battery (2) Jumper Cables (-)
(3) Jumper Cables (+) (4) Helper Battery
If the battery is discharged and the
engine cannot be started, it is possi-
ble to start the engine by connecting
the discharged battery to a battery
from another tractor or other extra
battery.
JUMP STARTING
T11O502A
To Next Page
Loading...
