DRIVING ON SLOPES
1. Please drive according to the con-
ditions of the slope at safe speed
so that the engine is not under
heavy load if possible.
2. Make sure to shift to the lower
gear in order to prevent the engine
from stalling on an uphill.
3. On the downhill slope, drive at low
speed.
For a heavy load job, such as
front end loader operation, use
low speed of the range shift
lever.
IMPORTANT
Make sure the brake pedals
are interlocked and differential
lock pedal is released.
Do not disengage the clutch or
put the shift lever in the neu-
tral position on a steep slope.
Otherwise, the tractor may
become inoperable. Before en-
tering a steep slope, move the
shift lever down to a proper
gear and never try to move the
shift lever on a slope. A seri-
ous accident can occur.
WARNING
PRECAUTIONS WHEN COMING
IN AND OUT OF WORK FIELD
1. Make sure that the left and right
pedals are interlocked.
2.Enter and exit the eld by driving
the tractor at a right angle to the
bank.
3. It is recommended to use the 4WD
and drive backward when moving
onto a bank.
T85O536A
To Next Page
Loading...
