CLUTCH PEDAL ENGAGEMENT CONTROL BUTTON
Tf1O403A
(A) FAST (B) SLOW
The engagement height of the clutch
pedal can be adjusted with this button
and this function is only available for
the power shuttle model.
Pressing the upper portion of the but-
ton speeds up the clutch engagement
operation while pressing its lower por-
tion slows down the clutch engagement
operation.
6. The regeneration underway lamp
blinks after the regeneration warning
lamp goes off.
Wait for approx. 30 to 40 minutes
until the regeneration process is
completed.
DEACTIVATION (LOWER BUTTON)
Do not press the deactivation button
during the regeneration process.
However, in an emergency, press
the deactivation button to stop the
regeneration process.
T11O4A52
(1) DPF Regeneration Switch
(A) Activation (B) Deactivation
ROPS
T11O4A31
(A) FAST (B) SLOW
CABIN ROPS
To Next Page
Loading...
