4. If tension is incorrect, loosen the
alternator mounting bolt and hinge
bolt. Pull the alternator outward
using a pry bar to reach the proper
belt tension.
5. Be sure to retighten the alternator
mounting bolt and hinge bolt se-
curely after adjusting belt tension.
6. Replace the fan belt if it is dam-
aged, cracked or worn.
fan belt tension (A)
10 ~12 mm (0.39 ~ 0.47 in.)
(1) Battery
BATTERY (V)
Mishandling the battery shortens the
service life and adds to maintenance
costs. If the battery is insufficiently
charged, the headlights may dim and
the engine is hard to start. It is im-
portant to inspect the battery periodi-
cally.
1. The battery cables should always
be clean and firmly connected.
When installing a new or used bat-
tery, clean its terminals.
2. Check the battery and cable for
damage and corrosion.
TF1O711A
-
furic acid that can burn you.
Do not allow the battery fluid
to contact your eyes, skin, or
-
dentally get it in your eyes or
and contact your doctor.
while working on the battery.
eyes.
Use only the battery with the
WARNING
3. Apply grease to the terminals and
cable end in order to prevent cor-
rosion.
CAUTION
-
fore checking belt tension.
•
To Next Page
Loading...
