(1) Parking Brake Lever (2) Brake Pedal
(3) Connecting Hook
(A) Depress (B) Lower
24. Interlock the brake pedals and
apply the parking brake.
M55O803A
1. Check the tire air pressure and
inate the tires if they are low.
2. Install a fully charged battery.
3. Check the fan belt tension.
4. Check all uid levels.
(Engine oil, transmission/hydrau-
lic oil, engine coolant and any at-
tached implements)
5. Remove grease from the ex-
posed cylinder rod.
6. Apply grease to the lubrication
points.
7. Depress the clutch pedal and
undo the latch hook.
8. Get onto the tractor and start the
engine.
9. Check if the instrument panel
and all parts operate correctly
while running the engine for a
few minutes.
USING TRACTOR AFTER STORAGE
CAUTION
To avoid injury:
Never clean the tractor body
while the engine is running.
Never run the engine in an en-
closed area without proper venti-
lation system in order to prevent
poisoning by exhaust gas.
When storing the tractor, re-
move the key from the switch
and store it separately in order
to prevent an unauthorized
person from operating the
tractor and being injured.
Cover the tractor after the
muffler and the engine have
cooled down.
If the battery is not to be re-
moved, disconnect its nega-
tive terminal at least. The wir-
ing can be gnawed by rodents,
leading to a re.
•
•
•
•
•
To Next Page
Loading...
