7. Use the clutch locking pin to keep
the clutch disengaged. If the clutch
is left engaged for a long period
of time, the clutch cover may rust,
making clutch disengagement im-
possible at the next operation.
8. Remove the battery from the trac-
tor. Store the battery following the
battery storage procedures. (See
section "Battery" in the chapter 7
"Maintenance")
9. Keep the tractor in a dry place
where the tractor is sheltered
from rain. Cover the tractor.
10. Store the tractor in a place out of
direct sunlight and heat. If it is un-
avoidable to keep it outside, cover
it with a waterproof cover. Lift
the tractor with a jack and place
blocks under its front and rear ax-
les. Also, keep direct sunlight and
heat away from the tires.
11. Clean the engine components as
well as the tractor.
12. Add grease to all the grease t-
ting.
13. Worn or damaged parts should
be replaced.
14. If a loader or implement is at-
t a c h e d , l o we r i t o n t o l e v e l
ground.
15. Apply grease to the exposed
section of the cylinder rod.
16. Flush the cooling system and
drain water from it. Also, add an-
tifreeze as well as water.
17. Replace all oil and lters.
18. Replace the air cleaner lter.
19. Chock the frame in order to re-
move the weight from the tires.
20. Set all control systems neutral.
21. Plug any open exhaust pipes.
22. Attach a tag onto the tractor to
inform the storage condition of
the tractor.
23. For the tractor equipped with the
air conditioning system, start its
engine once a month to run air
conditioning system.
(1) Clutch Pedal (2) Locking Pin
M55O7D9A
To Next Page
Loading...
