2. If you operate the steering wheel
with the tractor loaded, using an
implement or loader, the steering
wheel operation can be somewhat
difcult.Operatethesteeringwhile
tractor is in motion.
3. When a loader is mounted, adjust
the air pressure of the front tires
to its maximum specification and
mount weight or implement on the
3 point hitch of the tractor, and re-
move the front weight to make the
front and rear balance more stable
for safe working.
4. When turning the steering wheel to
its end, the operating sound of the
safety valve (relief valve) can be
heard. Do not continue to operate
the steering wheel to a maximum
right or left turn when you hear the
relief valve continually. (OK for a
short period of time). The tempera-
tureofthehydraulicuidmayrise,
causing malfunctions.
The power steering system in this
tractor is a load reaction, full hy-
draulic type.
The full hydraulic system means
that power necessary for power
steering is transferred by hydrau-
lic fluid only and therefore me-
chanical devices, such as rack
and pinion, are not installed on
the tractor. Therefore, the angle
of the KIOTI emblem on the cen-
ter of the steering wheel may dif-
fer occasionally, which is normal.
The load reaction type means
that the reaction force or impact
applied to the front axle is trans-
ferred to the steering wheel.
Therefore, the steering wheel
can be returned to its straight-
forward position from the turning
position.
NOTE
When driving on a road with
an implement attached to the
rear of the tractor, the contact
of the front wheels becomes
poor, resulting in poor steer-
ability. In this case, attach a
proper front weight and drive
at a low speed.
If a malfunction occurs while
driving on a road, stop the
tractor in a safe place and ser-
vice it. If it is not possible to
move the tractor, turn on the
hazard lights and set a warn-
ing triangle behind the tractor.
Otherwise, a rear end accident
may occur.
WARNING
To Next Page
Loading...
