If trying to lift an object with
e x c e s s i v e w e i g h t b y t h e
3-point hitch while the tractor
is not equipped with proper
front suit case weights, the
front w heels may be l ift ed
instead, leading to roll over.
Make sure to follow the speci-
cations for use.
WARNING
movement of the control lever us-
ing the stop bolt.
M55O558A
(1) Top Link
(A) Traction Power Is Not Required (Rotary Etc.)
(B) Heavy Load Traction Work
(C) Normal Load Traction Work
1. The draft control function is used
to prevent the wheels from spin-
ning and the engine from stopping
due to excessive draft load when
the tractor is used for work which
requires a lot of draft, such as
plowing.
2. The draft function is activated
when the lowest or middle hole on
the top link of the 3-point hitch is
used. The middle hole is for sensi-
tive draft control.
3. To keep the plowing depth shallow,
put the draft control lever to the
rear (shallow) position.
The plowing depth tends to become
deeper naturally by outer condi-
tions. When the load increases by
DRAFT CONTROL
(1) Draft Control Lever
(A) Lifting (B) Lowering
T11O453A
To Next Page
Loading...
