8. Check for correct coupling be-
tween tow hook and trailer. See
the Towing Attachments chapter.
9. Use ballast weight as recom-
mended. Never add more ballast
to compensate a higher load than
allowed. Reduce load for safety.
10. A safety chain will help control
drawn equipment should it be
accidentally separated from the
draw-bar while transporting. Us-
H11O682a
ing the proper adaptor parts,
attach the chain to the tractor
draw-bar support or other speci-
fied anchor locations. Provide
only enough slack in the chain to
permit turning. See your Dealer
for a chain with a strength rat-
ing equal to, or greater than the
gross weight of the towed equip-
ment.
11. If the front of the tractor tends to
rise up when heavy implements
are attached to the three point
hitch, weights should be installed
on front of the tractor. Do not op-
erate the tractor with a light front
end.
T66O112a
To Next Page
Loading...
