KITO ER2 Series User Manual

119
Appendix
This Appendix summarizes the information helpful for the use of KITO electric chain
hoist, such as optional parts, technical materials and service network.
■
Optional Parts ................................................................................120
■
Product Structure and Names of Each Part ...............................122
■
Technical Material .........................................................................124
• Hook Dimensions (for ER2) .......................................................124
• Table of Lifting Load ................................................................... 124
• Rated Motor Current ...................................................................124
• Conversion Table between Lift/Travel/Speed ........................... 126
• Clearance between Trolley and Applicable Rail .......................127
• Wiring Diagram of Single Speed ER2/ER2SP/ER2SG .............128
• Wiring Diagram of Dual Speed ER2/ER2SP/ER2SG ................129
• Wiring Diagram of Single Speed ER2M ....................................130
• Wiring Diagram of Dual Speed ER2M .......................................131
■
Check Sheet for ER2 Series Electric Chain Hoist Daily inspection ........132
■
Check Sheet for ER2 Series Electric Chain Hoist Frequent Inspection ....... 134
■
Check Sheet for ER2 Series Electric Chain Hoist Periodic Inspection .......136

KITO ER2 Series Specifications

General

Control Voltage	24V
Duty Cycle	40% ED
Protection Class	IP55
Temperature Range	-20°C to +40°C
Type	Electric Chain Hoist
Frequency	50/60 Hz
Motor Insulation	Class F
Brake Type	Electromagnetic
Load Chain Grade	Grade 80
Ambient Temperature	-20°C to +40°C
Power Supply	3-phase
Lift Height	3 to 30 meters
Chain Falls	1 or 2
Voltage	200-240V, 380-480V