KITO ER2 Series User Manual

7
Chapter 1
Handling the Product
This chapter describes mainly how to use, assemble and install, and the check
after installation. It also describes the daily inspection items before use.
●
For Operators and Maintenance Engineers
Type and Names of Each Part ..........................................................8
Opening the Package ......................................................................11
Product Specication and Operational Environment ..................16
How to Use ......................................................................................19
● Daily Inspection of Electric Chain Hoist (Hook Suspended Type) 20
● Daily Inspection of Motorized Trolley (MR2) .............................25
● Daily Inspection of Manual Trolley (TSG/TSP) ..........................26
● How to Operate the Push Button Switches ...............................28
● Operation ......................................................................................31
● Speed Change of Dual Speed VFD Model .................................34
● How to Sling the Load Properly .................................................34
● How to Suppress the Swinging of a Load .................................34
● Precautions After Work ...............................................................35
●
For Maintenance Engineers and Installars
Work Flow of Assembling and Installation....................................36
Assembling ......................................................................................37
● Assembling Parts to Electric Chain Hoist .................................37
● Combination with the Trolley ...................................................... 41
● Checking Power and Power Cable .............................................52
● Connecting Cables ......................................................................54
Installation ........................................................................................ 57
● Connecting Power and Power cable ..........................................57
● Installing the Hook suspended Type (hoist only).........................57
● Installing the Trolley Combined Model .......................................58
Check after Installation ...................................................................61

KITO ER2 Series Specifications

General

Control Voltage	24V
Duty Cycle	40% ED
Protection Class	IP55
Temperature Range	-20°C to +40°C
Type	Electric Chain Hoist
Frequency	50/60 Hz
Motor Insulation	Class F
Brake Type	Electromagnetic
Load Chain Grade	Grade 80
Ambient Temperature	-20°C to +40°C
Power Supply	3-phase
Lift Height	3 to 30 meters
Chain Falls	1 or 2
Voltage	200-240V, 380-480V