KITO ER2 Series User Manual

74
Frequent Inspection (continued)
Chapter 2 Inspection
■
Manual Trolley (TS2) Frequent Inspection
■
Appearance
Item Check method Criteria When failed
Travel Rail • Check visually. • To have no apparent deformation and damage Check items in
accordance with
“TravelRail”described
in Chapter 2 “Periodic
Inspection”.(P86)
Oiling
(to the gears
of wheel)
• Check visually. • To be oiled adequately Apply oil to gears.
■
Motorized Trolley (MR2) Frequent Inspection
■
Appearance
Item Check method Criteria When failed
Combination • Shake the manual trolley to
check.
• The motorized trolley shakes lightly to right
and left.
Combine the electric
chain hoist and
the manual trolley
securely.
Travel Rail
• Check visually. • To have no apparent deformation and damage Check items in
accordance with
“TravelRail”described
in Chapter 2 “Periodic
Inspection”.(P86)
Oiling
(to the gears
of wheel)
• Check visually. • To be oiled adequately Apply oil to gears.
■
Push Button Switch, Power Supply
Carry out the inspection referring to “Frequent Inspection Items” of the electric chain hoist (ER2). (P72, 73)
Motorized Trolley (MR2) Frequent Inspection / Manual Trolley (TS2) Frequent Inspection
Frequent Inspection
2

KITO ER2 Series Specifications

General

Control Voltage	24V
Duty Cycle	40% ED
Protection Class	IP55
Temperature Range	-20°C to +40°C
Type	Electric Chain Hoist
Frequency	50/60 Hz
Motor Insulation	Class F
Brake Type	Electromagnetic
Load Chain Grade	Grade 80
Ambient Temperature	-20°C to +40°C
Power Supply	3-phase
Lift Height	3 to 30 meters
Chain Falls	1 or 2
Voltage	200-240V, 380-480V